Tag Archives: Arduino

CJMCU-MEGA 2560 front side

[How to] CJMCU-MEGA 2560, sensors and Multiwii: The Complete Guide

The Complete Guide to run the Multiwii software on the CJMCU-MEGA 2560 with custom sensors. A.k.a.  Arduino Mega 2560 ATmega2560-16AU This board is nothing else than an Arduino Mega 2560 with a reviewed layout, in order to be mount friendly and to have a reduced size. This is very similar to the CRIUS AIO which, as its own name suggests, has a 9DOF sensors onboard, Read More →

Mini flight controller AEORC v0.1 – How To connect motors and receiver

How to connect motors, servos  and rc receiver to Multiwii Mini Flight Controller w/FTDI Interface This post makes part of a complete guide to this flight controller. Unfortunately this products is no longer present in the hobbyking catalogue, but there is another good version which i would suggest in place of this one: MultiWii Lite V1.0 Flight Controller w/FTDI or, if you want to have Read More →

AEORC-Multiwii-FTDI-USB-adapter

Multiwii Mini Flight Controller FTDI / USB Adapter on Mac Os X

This Article is part of a complete guide to the configuration of this flight controller and it will cover the steps needed in order to get the FTD / USB adapter correctly recognized and working properly under Mac Os X 10.7.5. I’m writing this post, about this very FTDI / USB adapter (AEORC) because i spent a considerable amount of time trying to get the Read More →

Multiwii-IMU-GY-80-BMP085-nine-axis-L3G4200D-ADXL345-HMC5883L-BMP085-IMU-magnetic-acceleration-gyroscopes

Multiwii GY_80 config.h Download

Multiwii GY_80 config.h Download Here i leave this download available to me and all people who need help on how to configure the 9DOF gy_80 for multiwii. Remember to check my article about Multiwii anf GY_80 (available in italian here) because you have to read about the need either of using internal pullups (i didn’t do it) OR of using two external pullup resistors, on Read More →

This image shows the Multiwii IMU GY_80

Multiwii MWC, Chinese 10DOF (codename GY-80) and Arduino Nano V.3: hooking and testing

Well, i just received my i2c sensors breakout board… Here it is what the Multiwii software configuration file config.h calls GY_80 or GY-80. There is no brand, no model, no serial. We know something just about single main components/chip: (Visited 18,258 times, 16 visits today)